How to Use the Staze Preserve Jar (Step-by-Step Guide)

Staze Preserve Vacuum Seal Jar

How to Use the Staze Preserve Jar (Step-by-Step Guide)

If you want maximum freshness, zero odor, and a truly airtight seal, using your Staze Preserve correctly matters. The good news? It’s simple and once you feel and hear the seal engage, you’ll instantly understand why it’s different.

This guide walks you through exactly how to use Staze Preserve, step by step, so you get the full benefit of its patented vacuum-seal system every single time.

 

What Makes Staze Preserve Different?

Unlike standard storage jars that rely on basic screw-top lids, Staze Preserve uses a patented air-removal mechanism that actively pulls oxygen out of the jar. Less air means:

  • Longer-lasting freshness
  • Better protection from moisture and environmental exposure

  • Strong odor containment

The key is engaging the seal properly — and that’s what the steps below ensure.

How to Use Staze Preserve (Correct Method)

Step 1: Remove the Cap & Internal Components

Fully unscrew the cap from the jar.

If you’re using internal accessories (such as the Joint Holder), remove all materials from inside the jar before sealing.

This ensures the seal forms cleanly and evenly.

Step 2: Reattach the Cap — Extra Tight

Place the cap back onto the jar and twist it firmly.

Go slightly tighter than you would with a normal jar. You should feel the cap lock into place — this step is critical for activating the vacuum seal.

Step 3: Hold the Jar Horizontally

Position the jar horizontally:

  • Left hand on the jar body

  • Right hand gripping the cap

This positioning allows the internal mechanism to engage properly.

Step 4: Pull the Cap Upward to Activate the Seal

While gripping the jar tightly with your left hand, pull the cap straight upward with your right hand until it fully extends.

You will hear a distinct audible clicking sound!!

That click is your confirmation:

  • All excess air has been removed

  • The jar is now fully sealed

  • Freshness and odor protection are locked in

If you don’t hear the click, repeat the step once more to ensure the seal is engaged.

How Do You Know It’s Fully Sealed?

You’ll know Staze Preserve is working when:

  • You hear the click

  • The cap feels securely extended

  • The jar has a firm, airtight feel when handled

That sound isn’t just satisfying — it’s functional proof that the vacuum seal is active.

Tips for Best Results

  • Always remove accessories before sealing

  • Twist the cap tighter than a standard jar

  • Pull the cap straight up (not at an angle)

  • Re-engage the seal anytime the jar is reopened

Why Proper Use Matters

Using Staze Preserve correctly ensures:

This isn’t just storage — it’s active preservation.

Final Thoughts

Once you’ve used Staze Preserve a few times, it becomes second nature. That audible click is your signal that everything is protected exactly as designed.

Bookmark this guide, link it in emails, share it in support replies. This is the definitive reference for how Staze Preserve works.

 

29 enero 2026
Izquierda Posts antiguos Regresar a Noticias

Dejar un comentario